GCXO Error for RNAV30 in AIRAC Cycle 1702

This forum answers all questions about products before you decide to become a subscriber.

Moderator: Ian

GCXO Error for RNAV30 in AIRAC Cycle 1702

Postby watauga » Sat Jul 15, 2017 5:00 am

To Whom It May Conern:

I have AIRAC cycle 1702 through my purchase of the Eclipse 550 NG. While flying into GCXO I chose the RNAV30 for final. When I did this I was taken to runway 12 at GCXO. See RNAV30 procedure:

FINAL,R30-R,30,R,3
IF,CD116,28.546583,-16.533861,LRO,296.0,10.3,2,4500,0,0,0,0,0,0
CF,FD116,28.515750,-16.442639,0,LRO,296.0,5.2,116.0,5.2,2,3900,0,0,0,0,2,0
CF,MD116,28.490889,-16.369194,0,LRO,296.0,0.0,116.0,4.2,1,2362,0,0,0,0,3,0
FA,MD116,28.490889,-16.369194,0,LRO,0.0,0.0,116.0,2,6000,0,0,0,0,0,0
DF,TFN,28.536833,-16.268778,1, ,0.0,0.0,1,6000,0,0,0,0,0,0
HM,TFN,28.536833,-16.268778,1, ,0.0,0.0,177.0,04.3,0,0,0,1,210,0,0,0,0

The heading for the RNAV30 appears to be 116 degrees instead of 297 degrees listed on SkyVector.. This is the same procedure listed for RNAV12 at GCXO.:

FINAL,R12-R,12,R,3
IF,CD116,28.546583,-16.533861,LRO,296.0,10.3,2,4500,0,0,0,0,0,0
CF,FD116,28.515750,-16.442639,0,LRO,296.0,5.2,116.0,5.2,2,3900,0,0,0,0,2,0
CF,MD116,28.490889,-16.369194,0,LRO,296.0,0.0,116.0,4.2,1,2362,0,0,0,0,3,0
FA,MD116,28.490889,-16.369194,0,LRO,0.0,0.0,116.0,2,6000,0,0,0,0,0,0
DF,TFN,28.536833,-16.268778,1, ,0.0,0.0,1,6000,0,0,0,0,0,0
HM,TFN,28.536833,-16.268778,1, ,0.0,0.0,177.0,04.3,0,0,0,1,210,0,0,0,0

When you make the corrections will you please send me the GCXO revised procedures.

Thank you for your help.
Ron West
KBNA
watauga
 
Posts: 3
Member Since: 06/2017
Member Ranking: Basic

Return to Pre-purchase Questions

Who is online

Users browsing this forum: No registered users and 2 guests